This page shows a list of RC models of all types: plans only, with some parts, and with pre-moulded parts. Excluded are semi-scale Me 163 RC models, that only share the basic wing planform with the real thing. If you have further questions, chances are small I can help you, since I'm not an RC modeler. A better option would be to write the RC modelers that are featured on this page; their e-mail addresses can be found on the individual web pages.
| Type | Company | Country | Kit # | Year | Comments | |
|---|---|---|---|---|---|---|
| Me 163B | Aerographics | ? | G333 | 1/23 scale (41 cm / 16 inch span) suited for New Rapier L2 Jet unit or Jetex Motors. See the SAMS Models site for pictures | ||
| Me 163B | Vöster | DE | 001-00090 | 1/13.7 scale (68 cm span) electric RC kit. Read Mike Smart's report on this model, or Adam Frazer's report. Possibly also sold under the Simprop label | ||
| Me 163B | CFK Heli Innovations | DE | 1/13.3 scale (70 cm span) electric RC kit | |||
| Me 163B | Hacker | DE | 2015 | 1/12.8 scale (73 cm span) RC foam model with electric motor. | ||
| Me 163B | Raketenmodellbau Klima | DE | 2015 | 1/12.8 scale (73 cm span) RC foam glider model with a Klima rocket motor for launch. Reportedly the same basic model as the Hacker electric powered model | ||
| Me 163B | Gus Morfis | USA | 1/11.9 scale (78 cm / 30.75" span) plans, for a .12 to .15 engine | |||
| Me 163B | Topp | 1/10 scale (95.5 cm span) RC kit. Read Emile van Essen's report on this model | ||||
| Me 163B | Durafly | HK | 2015 | 1/9.8 scale (95 cm span) RC foam model. Hobby King's house brand, where it is sold | ||
| Me 163B | Rojair | UK | early 80's | 1/8.9 scale kit (104 cm / 41" span) which could be finished as a powered model or a glider. ABS moulded fuselage and fin, veniered foam wings and a take-off dolly. Also included is a hardware pack with wires, tank, pilot figure, and balsa stock. Full sized plans and detailed instructions, and a transfer sheet with full stencil markings. Photos of the box and the contents can be seen here | ||
| Me 163B | Aviation Modeller International | UK | 1/8.2 scale (113 cm / 44.5" span) plans by Keith Humber for an RC slope soarer. They were published in the September 1997 issue and can also be ordered as single sheet plans from the publisher | |||
| Me 163B | Quality Fiberglass (Bob Sealy) | USA | 1/7.6 scale (122 cm / 48" wingspan) glass fiber molded fuselage and foam core wings that can be skinned with balsa or glass fiber. Lee Coleman built one and wrote a short report | |||
| Me 163B | Brian Taylor | UK? | 1984 | 1/7.4 scale (126 cm / 49.75" span) plans. A fibreglass cowl and canopy are available | ||
| Me 163B | WEGA Sunshine | DE | 16500 | 1/7 scale (135 cm span) kit. See the WEGA Sunshine site for more information | ||
| Me 163B | Lenger Modellbau | DE | 1/7 scale (133 cm span) kit, glassfibre fuselage, balsa foam wing. Apart from the Lenger website, see the Willi Blick's site for more information | |||
| Me 163B | CFK Heli Innovations | DE | 1/6.8 scale (136 cm span) electric RC kit, balsa / kevlar / carbon structure | |||
| Me 163B | Model Airplane News | USA | FSP11761 | 1/6.2 (150 cm / 59") scale drawings. See David Archibold's model built from these plans | ||
| Me 163B | Topp-Rippin | DE | 1/6.6 scale (140 cm span) kit, glassfibre fuselage. See Beni Lörtscher's model | |||
| Me 163B | Scale Plans & Photo Service | USA | 1/6 scale drawings by Dennis Bryant | |||
| Me 163B | Bob Holman | USA | 1/6 scale kit (drawings possibly also available). Read Lee Coleman's experiences with this R/C model, or a photo report of an actual rocket powered one! | |||
| Me 163B | WEGA Sunshine | DE | 15300 | 1/6 scale (155 cm span) kit. | ||
| Me 163B | DW Modelltechnik | DE | 2002 | 1/5 scale (180 cm span) kit with jet engine. Take-off weight 6.5 kg, 100 N turbine, top speed 400 km/h, initial rate of climb 18600 ft/min (94 m/s). Some photos can be seen here | ||
| Me 163B | WEGA Sunshine | DE | 16200 | 1/5 scale (186 cm span) kit | ||
| Me 163B | Jim Kiehl | USA | 1/4.5 scale (208 cm / 82 inch span) construction drawings, cost is 50$ including priority shipping. The models by Sal Calvagna, Kevin Shaw and Rich Zwirblis were constructed from these drawings | |||
| Me 163B | Joe Saitta | USA | 1/4.5 scale (208 cm / 82 inch span) kit, based on Jim Kiehl drawings. Read Bob Chubb's report on building this model | |||
| Me 163B | Airborne Magazine | AU | 574 | 1/4.0 scale (235 cm / 93 inch span) plans. See Alfs RC Home Page (via the Wayback Machine) for a report on building a model from these plans | ||
| Me 163B | Joe Saitta | USA | 1/3.7 (254 cm / 100 inch span) kit, based on Jim Kiehl drawings | |||
| Me 163B | Jim Kiehl | USA | 1/3.5 scale (267 cm / 105 inch span) construction drawings, cost is 60$ including priority shipping | |||
| Me 163B | PEWO | DE | 1/3 scale (310 cm / 122 inch span) construction drawings, set of five, from 1979. Drawings say 'P. Kriz - PEWO - Flugtechnik' | |||
| Me 163B | AS Composite | DE | 1/3 scale (310 cm / 122 inch span) carbon fiber model, semi-scale, 5 kg empty weight | |||
| Me 163C | S&B Models | Electro model, pusher prop. See this page for a built-up model, fitted with a small video camera for inflight footage! An updated version ("Modell verbesserung II") came out in 2005, with a full depth balsa spar, the wing is now more scale, and the landing skid is all expanded polypropylene | ||||
See also the links page, where you can find links to RC models built from scratch, including a 1:2 scale Komet model ! | ||||||